As employer or warehouse operator, you are obliged to inspect racking and storage facilities. This obligation is defined in DGUV rule108-007 and DIN EN 15635. As certified expert rack inspectors, qualified rack inspectors, we as UQSR inspect your rack systems nationwide, independently of their manufacturer and in accordance to the regulations for defects and faults. Our rack inspections and rack checks are of course carried out in accordance with DIN EN 15635 and DGUV rule 108-007 formerly BGR 234. Each ware house operator is independently responsible for the faultless condition of their work equipment in accordance with BetrSichV as well as for the safety of the employees in accordance with Occupational Health and Safety Act. Where racking systems and storage equipment are used for storage and which are thus regarded as technical work equipment, the annual safety test and inspection of the assembled racking systems is mandatory. This obligation is regulated by the Industrial Safety Regulation Betr SichV. DIN EN 15635 also regulates the inspection of racking systems, specifies the scope and procedure and defines the threshold values for risk assessment. The inspection obligation applies to: Pallet racks, Rack racks, Multi-storey facilities, Cantilever racks, Drive-in racks, Drive-through and flow racks, manually operated racks. Legally, a rack inspection has to be carried out once a year respectively every 12months. Only the regular control and preparation of a risk assessment risk analysis ensures your legal compliance as a warehouse operator and can guarantee the safety of your employees and the protection of your goods. Your benefits through the rack inspection: By means of inspection you ensure safety in your storage facility, Regular inspections increase the service life of your racks, Early damage detection reduces the risk of accidents. The scope of rack testing with UQSR; General condition, Stability and tilt resistance, Professional assembly, Completeness and damage of components and protective devices, Load carriers and load: suitability and arrangement. We carry out rack inspections in accordance with DIN EN 15635 and DGUV regulation 108-007. With our service points, we ensure a nationwide inspection service and guarantee short travel times and optimal performance on site! With our support, you, as location operator, will comply with the obligation of having your racks inspected. Many years of experience and member of the Association of Rack Inspectors. Independent of manufacturer. Active nationwide thanks to service points throughout India. Date depending on your availability. Rack inspection during operation without incurring downtime or standstill in the warehouse. As are liable partner, we professionally and reliably carry out the annually recurring UVV inspections in your company. In consultation with the client, we coordinate the date for the rack inspection with you. Our certified rack inspectors visually inspect all storage facilities and their compliance with the regulations of the professional association according to DGUV rule 108-007.We check all actual and approved loads Visible damage to the rack components is determined by visual inspection in accordance with DIN EN15635. Racking system and construction are compared with the load label and updated. Our rack inspectors evaluate components of the rack system according to the severity of the damage. A list of necessary replacement parts is prepared for damaged or missing rack components. Those responsible for the project prepare a comprehensive quotation, free of charge, for the necessary repair of the rack system. checklist and picture documentation on CD are used to record the damage to the racking at each location. Based on the inspection report, we prepare an inspection protocol, as any visual inspections must be documented and filed in the company. You will receive all necessary documents and protocols in a folder. We instruct the safety officer on site foreach operation to carry out regular inspections during the year. If we do not find any defects, faults or damage during the inspection of your racking system, we record this with a test badge and detailed documentation of the racking inspection.
Plot No.- 37, IMT Manesar, Gurugram, Haryana, 122051, India